Updated smoke detector example

examples/MQ-Board/MQ-Board.ino

@@ -29,20 +29,6 @@
 #define pin7 A7 //Analog input 7 of your arduino
 #define pin8 A8 //Analog input 8 of your arduino
 #define pin9 A9 //Analog input 9 of your arduino
-
-#define RatioMQ2CleanAir 9.83 //RS / R0 = 9.83 ppm 
-#define RatioMQ3CleanAir 60   //RS / R0 = 60 ppm 
-#define RatioMQ4CleanAir 4.4  //RS / R0 = 4.4 ppm 
-#define RatioMQ5CleanAir 6.5  //RS / R0 = 6.5 ppm 
-#define RatioMQ6CleanAir 10   //RS / R0 = 10 ppm 
-#define RatioMQ7CleanAir 27.5 //RS / R0 = 27.5 ppm  
-#define RatioMQ8CleanAir 70   //RS / R0 = 70 ppm   
-#define RatioMQ9CleanAir 9.6  //RS / R0 = 9.6 ppm    
-#define RatioMQ131CleanAir 15 //RS / R0 = 15 ppm
-#define RatioMQ135CleanAir 3.6//RS / R0 = 3.6 ppm     
-#define RatioMQ303CleanAir 1  //RS / R0 = 1 ppm    
-#define RatioMQ309CleanAir 11 //RS / R0 = 11 ppm    
-
 //#define calibration_button 13 //Pin to calibrate your sensor
 
 //Declare Sensor

examples/smokeDetector/smokeDetector.ino

@@ -17,22 +17,35 @@
 #include <MQUnifiedsensor.h>
 
 //Definitions
+#define placa "Arduino UNO"
+#define Voltage_Resolution 5
 #define pin A0 //Analog input 0 of your arduino
-#define type 4 //MQ4
+#define type "MQ-4" //MQ4
+#define ADC_Bit_Resolution 10 // For arduino UNO/MEGA/NANO
+//#define calibration_button 13 //Pin to calibrate your sensor
 
 //Declare Sensor
-MQUnifiedsensor MQ4(pin, type);
+MQUnifiedsensor MQ4(placa, Voltage_Resolution, ADC_Bit_Resolution, pin, type);
 
 void setup() {
   //Init serial port
   Serial.begin(115200);
-  /*****************************  MQInicializar****************************************
+  //Set math model to calculate the PPM concentration and the value of constants
-  Input:   
+  MQ4.setRegressionMethod("Exponential"); //_PPM =  a*ratio^b
-  Output:  
+  MQ4.setA(30000000); MQ4.setB(-2.786); // Configurate the ecuation values to get CH4 concentration
-  Remarks: This function configure the pinMode
+  /*
-  ************************************************************************************/ 
+    Exponential regression:
-  //init the sensor
+  Gas    | a      | b
-  MQ4.inicializar(); 
+  LPG    | 3811.9 | -3.113
+  CH4    | 1012.7 | -2.786
+  CO     | 200000000000000 | -19.05
+  Alcohol| 60000000000 | -14.01
+  smoke  | 30000000 | -8.308
+  */
+  /*****************************  MQ Init ********************************************/ 
+  //Remarks: Configure the pin of arduino as input.
+  /************************************************************************************/ 
+  MQ4.init(); 
 }
 
   void loop() {
@@ -43,7 +56,7 @@ void setup() {
   ************************************************************************************/ 
   //Read the sensor and print in serial port
   //Lecture will be saved in lecture variable
-  int lecture =  MQ4.readSensor("smoke"); // Return smoke concentration
+  int lecture =  MQ4.readSensor(); // Return smoke concentration
   Serial.print("MQ4 smoke ppm lecture: ");
   Serial.print(lecture);
   Serial.println(" ppm");